fresh air in both ZL s

f1nxlife

Supporting Member
Joined
Oct 8, 2009
Messages
1,124
Reaction score
2
good evening fellows, one post here before bedtime, after a long spell,i used my little air compressor to re fill all of the shocks on both the 900 and the 1000, apx 15 lbs in the front and rears. Now i can have a little more ground clearence and a little better suspension action, seems like the old shocks are still holding air, im not sure for how long, after riding these bikes so much, sometimes its hard to tell if and when the air leaks out. Some day, im going to spen the money and have both sets of front forks re sprung and rebuilt and im going to buy aftermarket rear shocks for both bikes, its expensive,looking at next year, or after september of this year, i will have to see, i mean, im not having any problems with the factory units, for 26 years old bikes, they still work really good,,
 
good evening fellows, one post here before bedtime, after a long spell,i used my little air compressor to re fill all of the shocks on both the 900 and the 1000, apx 15 lbs in the front and rears. Now i can have a little more ground clearence and a little better suspension action, seems like the old shocks are still holding air, im not sure for how long, after riding these bikes so much, sometimes its hard to tell if and when the air leaks out. Some day, im going to spen the money and have both sets of front forks re sprung and rebuilt and im going to buy aftermarket rear shocks for both bikes, its expensive,looking at next year, or after september of this year, i will have to see, i mean, im not having any problems with the factory units, for 26 years old bikes, they still work really good,,

I had a violent shake years ago at high speed riding and it wasn't until I changed my rear shocks later that I found one shock collapsed and not working. One shock was doing all the work and was causing a tail whip around 100mph. It was scary! Never a bad idea to check em frequently!
 
I have a low pressure line with a regulator on my air compressor that is always set for filling the zl shocks and forks. So its a once a week thing as I pull the bike out of the garge I simply hit all the fittings with the hose and know they are right where I want them no need to even pull the air gauge out.
 
you guys know all the tricks, i have to do things the hard way.,rite on paul
 
you guys know all the tricks, i have to do things the hard way.,rite on paul

I have one of those bump starters with a built in air compressor and dial.....It inflates slowly and you just kill the power at the right PSI

Heres a pretty good deal.

http://www.amazon.com/Black-Decker-...NK/ref=sr_1_33?ie=UTF8&qid=1338691630&sr=8-33

Anyone running this shock? I saw a thread here about someone getting 11, or 11.5 and feeling the pegs scrape at every other turn...I think that I'm going to pull the trigger on a pair of 12". These have my attention.
http://www.ebay.com/itm/200696204378?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
 
Last edited:
those are pricey, they look pretty cool, i dont think i wana spend that kind of money, better to go through a few pairs of boots, when i flat track the ZLs. you would be suprised how much faster you can corner these bikes, by riding them like a dirt bike. ass off the seat and feet down !!
 

Attachments

  • IMG_9158.jpg
    IMG_9158.jpg
    26.7 KB · Views: 17
those are pricey, they look pretty cool, i dont think i wana spend that kind of money, better to go through a few pairs of boots, when i flat track the ZLs. you would be suprised how much faster you can corner these bikes, by riding them like a dirt bike. ass off the seat and feet down !!

Back in the day they would have dirt track races..no alcohol sidewinders, but not dirt bikes as we know them today....and they weren't street bikes either, a hybrid between pure dirt and street. And that's EXACTLY the way they road them....Wide World of Sports, circa 1980...Pricey.....kinda relative, I don't have a boat, like 90 percent of my friends have and they spend that on fuel in one day. I think alot of the bikes I'm thinking about were Harlets
 
Last edited:
i hear you scoob, im known to spend lots of money on bikes,like all of us, but at the moment , i need to keep my savings up as much as i can, lol...but maybe next year ill consider it, then again, i would like to upgrade the suspension on the F1 lol
 
I have a low pressure line with a regulator on my air compressor that is always set for filling the zl shocks and forks. So its a once a week thing as I pull the bike out of the garge I simply hit all the fittings with the hose and know they are right where I want them no need to even pull the air gauge out.

Paulfun, I have the same capability. What are you doing, setting the regulator at a desired pressure and then letting it cut off at that pressure? That way if it is set at, say 20psi, you let it bleed into the shock down to zero?
 
No My tank always has 200lb of air on hand out one hose and the other side has a regulator that wont let anything more than what i have it set at pass threw it so it bleeds the 'line pressure only" down to the set amount. I can regulate that pressure down to less than 1lb or as high as 200lb of pressure but since the zl is the only thing I really use the second line for it never gets changed and is always ready to go for the zl I also have the ability to run a 3rd regulated line but rarely need it and only use it when i will be using air tools for extended periods that require oil mixed with the air for extended use.
 
No My tank always has 200lb of air on hand out one hose and the other side has a regulator that wont let anything more than what i have it set at pass threw it so it bleeds the 'line pressure only" down to the set amount. I can regulate that pressure down to less than 1lb or as high as 200lb of pressure but since the zl is the only thing I really use the second line for it never gets changed and is always ready to go for the zl I also have the ability to run a 3rd regulated line but rarely need it and only use it when i will be using air tools for extended periods that require oil mixed with the air for extended use.

Yes, same setup I have. What are you running in front and rear shocks? Manual said atmospheric pressure in front.
 
I currently run 12psi in both front and rear.

It would be hard to have one set up like mine as its a custom build from an old industrial unit that I got for free some years ago. All the things on it besided the compressor and the tank itself are of my own choosing including the electric wireing oilers,filters and all regulators and line bleeds. This thing is a beast, twin cyl 94mm bore horazontally oppsed twin that can hold the tank at 180psi even with all 3 lines being used at the same time. A little overkill for the home shop and a bit on the ugly side but for the cost of something in the industrial range of compressors free is for me!
 
Last edited:
I had race tech springs put in the front and they made a huge difference except....the stock rears sag more in back because the front is stouter now.I also had a sphincter factor of ten because of tank slappin'. I hit it hard, passed a pack of cagers and then the wobble began. Somewhere in the back of my mind I decided I wasn't going to go down in front of all the cars I just passed. Between possible embarrassment and death I managed to wrangle the old girl. The most focused I have ever been in my life.
I now keep the shocks at 15psi. I would like to get the 440's ,but like you and most others...$$$$$.
 
I have one of those bump starters with a built in air compressor and dial.....It inflates slowly and you just kill the power at the right PSI

Heres a pretty good deal.

http://www.amazon.com/Black-Decker-...NK/ref=sr_1_33?ie=UTF8&qid=1338691630&sr=8-33

Anyone running this shock? I saw a thread here about someone getting 11, or 11.5 and feeling the pegs scrape at every other turn...I think that I'm going to pull the trigger on a pair of 12". These have my attention.
http://www.ebay.com/itm/200696204378?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

12" my god! what you plan on doing some EVEL KNIEVEL s**t!!:rotf: sorry like mine low!! dnt think the zl was made for the curves...point and pull the trigger!!:pistols:
 
Personal preference on pressure. Rider weight & riding style, don't go too high or the seals may blow out.
 
The rears , according to supplemental, will go to 28psi. I like 18-20 with just me on it, but I ride at a spirited pace and prove to "her" she can handle some twisties...not like my vfr mind you, but she can hold her own. Did I tell you I got the awesome fork braces? They are slick!
 
Back
Top