Tires

ZLrider

Senior Member
Joined
Jun 3, 2009
Messages
1,217
Reaction score
113
I've had the same rubber on the 600 since I've had it. I don't put a whole lot of miles on it and the tires have lots of thread left, but they are at least 10 years old. They're not cracking either. Since I'm not hitting triple digits very often these days do I need to replace them anyway?

Are Tour Masters the best choice? Anybody know what size/sizes fit my bike? Last time I bought rubber none of the local dealerships seemed interested in mounting customer purchased rollers, so I wound up buying them from the local Honda dealer since the cost of mounting wasn't much cheaper then buying them from Honda and letting them put them on. What are you guys doing for mounting? Maybe this is a local issue, but I called around and everybody wanted to sell me new rubber, none offered to mount for a reasonable price.

Also does anybody know how to figure out how old the current tires are? Is there a code that can be read?
 
:hello: MFGs recommend replacing tires every five years or so. Let all the air out of both tires and check them for dry rot/cracks.
 
That's an interesting idea. Never heard that one before. Manufacturers would probably be happy if you replaced your parts every week though.....LOL I do know everything has a limit. Like helmets. Mine is past it's expiration date most likely, but it pretty much looks like new still. How often you replace your lid? When I find something that fits so well, I hesitate to get rid of it. I don't even think Shoei makes this model anymore and I had a helluva time finding one that fit my noggin right.

Think know the answer to this one, but there is no good way to support my bike while removing both wheels at the same time is there?
 
There is a number stamped on all tires that will tell you exactly when the tire was made. It is a 5 or 6 digit number but I dont remember how to read it. If you find it I can have my son break it down for you. I believe they all are inside a oval outline.
I would not replace unless there is weather check present. The climate it is stored in is the critical factor!
 
This tire was manufactured in the 51st week of 2007. The “5107” in the tire identification number.
upload_2022-6-11_17-58-25.jpeg
 
The date code used to be 3 digits but that changed because the quality of tires improved enough that they could still look to be in good shape well after 10 years. My Trail 90 tires are dated 472 (47th week of 1972) and only have cracks where where it sat flat for many years with only 1000 miles on them. I think they used a triangle with the 3 digit date code in '90s and went to the 4 digit code after that.
 
Good info guys, thanks a lot. One comment on jack under pipes. Think I actually did this once before, can't remember why, but don't believe supported the entire weight of the machine this way. Gotta figure though these pipes are not getting stronger with age and like anything else made out of steel they are likely getting weaker as the years go by. I'd just hate to find out the hard way that they are too thin to support 500 lbs currently. Am I correct that the pipes are not replaceable if I mess them up? Man I'd hate myself if I flattened my pipes and then couldn't get any replacements. I'm almost thinking they don't even make a 4-1 for the 600 either. Maybe I could build a wooden jig somehow that would put the pressure somewhere besides on the exhaust. Has anyone tried this?
 
I mount my tires at home. It’s not hard providing you have a stand to hold the tire. Hand tools on the ground will work in an emergency but be warned it is much harder without a purpose built stand.
The one I use is from harbor freight with an add on for motorcycle tires.
Balancing ? Over the years I have used or paid someone to use just about every known machine and simply put have not gotten anything better than the old fashioned method of using the bubble balancer for car and truck tires and an old fashioned slow spin by hand for the bike.
Matter of fact I have had some of those computer balancers give me a very bad job that once home and using the tried and true old fashioned method required less weights and a smoother ride.
Take that for what it’s worth as not everyone has the time to figure out how to use or should I say modify and or build adaptors to get some of the new rims onto the older balancing platforms.

I don’t recomend jacking our bikes up by the pipes if it can be avoided. I prefer using a sling and hoisting it up for tire changes. Repair work on the bike lift I do with a modified scissor jack and use of a sling from the top to ensure no accidental drop can become a nightmare.
If you look on the frame of the 900 there are two tabs about where one might expect a center mount stand could be mounted. Some spare scrap and an old pinto jack along with some welding should provide for a secure mounting place that might eliminate worries. I haven’t tried anything with that point on the frame as I have confidence in my sling and a purpose built bike jack but if I didn’t have a lift table that could be rolled under one of my support beams You can bet I would have made something to mount securely at that point.
 
:hello: PAUL: Can you post up pics of your tire changer and the other things that you are talking about. Thanks. My friends Wayne and Mark have both a motorcycle/ATV tire machine and a balancer. They bought both for $400. They mount tires for me at no charge.
 
Thanks for that well thought out and detailed reply Paul. I'd also be curious to see your setup, but for something that I may only need to do once I'm not sure it's worth my while to fab up anything too elaborate. I can see getting new tires is maybe going to turn into a pain in the behind.....like last time.

I'm liking the Tour Master tires, but I don't think the stock size is available for the rear. The manual says:
Front: 100/90-18 56H
Rear: 150/80-15 70H

Front is no problem, but seems like the closest I can get for the rear is 150/90-15 80V. I'm not sure what the numbers mean exactly. Seems like it would fit the rim, but are there other concerns? Will it rub? Throw my speedo off?
 
Dunlop K555 and F24 might be the easiest to get in the correct sizes. Using a 150/90 would add about 15 mm to the center tread. I think Kawasaki gave the bike way more than that with the stock tire. The speedometer inaccuracy won't change if you use the correct front tire. If you only ride solo, a 140/90 rear might be good.
 
:hello: For our 1988 KAWASAKI EL 250 B2 I went with MICHELIN commander 2 tires for the front the and rear.20220614_170537[1].jpg 20220614_170417[1].jpg 20220614_170450[1].jpg 20220614_165604[1].jpg 20220614_165650[1].jpg 20220614_165627[1].jpg 20220614_165638[1].jpg 20220614_165645[1].jpg 20220614_165650[1].jpg 20220614_170027[1].jpg 20220614_170059[1].jpg 20220614_170129[1].jpg 20220614_170204[1].jpg 20220614_170231[1].jpg 20220614_170306[1].jpg ________ The date code is 1716 which is week 17 year 2016. 20220614_170346[1].jpg Does any one know what all the other numbers mean besides the size of the tire.
 
Last edited:
I don't like Michelins. Overpriced and mediocre in auto applications. Is it any different with bikes? I sure don't want tires that are hard like a rock and crack like all the car Michelin tires I've had. How much did those set you back?

Here's a good web site I found that has info on what those nos all mean: https://www.chapmoto.com/blog/2017/...-up-whats-with-all-those-letters-and-numbers/

Still haven't figured out how old my current rollers are though.
 
:hello: MICHELIN tires are the best tires on the market today. I've been using them for 30 years or so. They are very quite. I had a set go 70 K miles on my Wifes 211 TOYOTA RAV 4. Just put a new set on a few months back. #1 in the USA. https://www.cartalk.com/tires/best-tire-brands. The ones on our EL 250 for the set was around $125 in 2016. My Nephew Paul has MICHELINs on his 1968 Cougar that are 15 years old or so. He drives it 500 miles a year or so and they have no dry rot or cracks.
 
Last edited:
One question about the 15 year old tires with no cracking. Is the car parked inside the garage when not in use?
I find that stored in the shade with more consistent temps and limited direct sunlight, we tend to see much longer life out of any brand tire.


Will try and get some pics for everyone when I get a chance. Lots of to do’s but not much time to do them. 3 engines to build, tranny in my BMW is dead, have to modify the driveway to accomadate bringing home my work truck, the Jeep needs u joints/calipers/pads, tractors are due for fluids and filters, grass needs mowed, dinning room is being redone and the wife still wants me to do her list of chores. So as they say it may be a bit till I get to it, heck I haven’t even got a good ride in yet this year (unless you count mowing the grass)!
 
:hello:My Nephew Paul's Cougar is stored in his shop along with his race cars which is climate controlled and the concrete floor is sealed.
 
Back
Top