High Beam too low

  • Thread starter Thread starter Silverider
  • Start date Start date
S

Silverider

Guest
Hi All,
Went to work early... first time in the dark with bike... went for the High beam switch, and the light output did increase, but the beam was pointing about 5 feet ahead of the front tire... Any thoughts???
 
:hello: My ZL 10s head light was really dim even after installing a super bright bulb. It had a haze glazed over on the inside. I thought it was supposed to be that way until I bought the EL 250 (1195 Miles) which uses the same head light as the ZL 10. I found a NOS one on E-bay for $45 shipped. Now I can blind God. :laughing7:.
 
OK... I will check on that... seems clear to me. Will see what I can do to verify.
Would need to wait till weekend to open the headlight assy., as Eli is now my ride to work.
The NOS one you are referring to R.J., is that the headlight housing: reflector, glass and a place for the H4 bulb?
 
Last edited:
Hi Folks,
Well...... I was studio!#@%$... Guess how long it has been since I have had a ride with a 'Bucket' headlight.
Apparently too long. Took it apart as was outlined... then realized all I had to do was push the thing down to actually get the low beam where it belongs, AND the High Beam, which does work, is no longer signaling the moon. Yep, I did that.
Thanks for all the great insights and I will get one of those Ultra lamps. Neat thing is on my old Bucket headlights, they did not have the cool right to left adjustment setup like the Eliminator does.
 
In opposite to the other Eliminators, the ZL900 is missing these 11045-xxxx brackets to fix the headlamp when adjusted right (maybe it was like 'we're late in production and can't change construction' or the Japs simply forgot it); look @ microfiches to see what I mean so to solve this everytime-coming-up-prob after steering a tight curve you have to tinker something...:laughing7:
 
Ahhh... thank you for that. I will have a look. My last bucket headlamp was the 1981 XT250, never recall have any problems with it, of any kind. With what I saw, briefly on the Eli, it seems that the headlight would shift position easily. I wonder if a different fiber washer stack might help.
 
Hi Folks,
Well...... I was studio!#@%$... Guess how long it has been since I have had a ride with a 'Bucket' headlight.
Apparently too long. Took it apart as was outlined... then realized all I had to do was push the thing down to actually get the low beam where it belongs, AND the High Beam, which does work, is no longer signaling the moon. Yep, I did that.
Thanks for all the great insights and I will get one of those Ultra lamps. Neat thing is on my old Bucket headlights, they did not have the cool right to left adjustment setup like the Eliminator does.

How does pushing the headlight down help if the beam was 5' in front of the bike to begin with? If high beam was in the trees which seems the opposite of what you said to begin with, I'd think the low beam would have been pretty much useless as well. Glad you figured it out, but adjusting the headlight seems like a normal thing to do when you get a new bike. Or a car for that matter. What amazes me is how the previous owner was driving around with the lights pointing every which way when they can fix the problem with a screwdriver.
 
Well... I was stupid... what I must have seen was the lower edge only. Any way... did not know if it was something to do with some other headlight fail circuit... But I own the blame for this one. Should have checked it before riding in dark. Must have thought I was riding an old Triumph.
Thanks
 
Back
Top