Sam's beast.

R.J. that is so kind of you. I really appreciate the kindness of everyone on this site in trying to help each other out. But my short 28" inseam and 152# makes me think that 13.5" shocks would make my stoplights a real chore. I noticed I had posted the wrong link on the generic shocks. They had another set that is eye to eye. the short shock that was on my bike is 12.5". That seat height was tolerable though I would like to maybe go a little lower but definetly not taller. This bike is wider than my old 1100 maxim and that was very difficult to balance.
Again thank you very much for the offer.:notworthy:
 
I did try my friends dr400 once. had to hook my knee over the seat and push off and jump at the same time. :rotf: Wish I had video of that.
 
:hello: I have the same problem. My son has a DRZ 400 also. One day I was riding it by myself in the woods & I crashed. I remembered seeing some concrete blocks a few hundred yards from my spill sight. So I left the bike to retrieve 2 concrete blocks so I could get back on the bike. After that I hooked up my cart to my 350 Grizzly & placed blocks threw out our 22 miles of trails. If I was you I would buy the 11 1/2 " Progressives that is for your bike. I also had an extra set of them & gave them to my friend Ron for his ZL 1000. He is also short stature. The problem with buying shocks that is not for your bike is the mounting points may not be offset correctly & the shocks will be tilted one way or the other. Also the ID may not be correct or your mounting studs maybe to long or to short.
 
Last edited:
:hello: I'm 5' 4" tall & my inseam is 27". I have the 11 1/2" Progressive shocks on the back of my bike. They cost $222. I can touch flat footed with tennis shoes on with no problem. I also lowered the forks 1 inch to level the bike.
 

Attachments

  • IMG_0980.jpg
    IMG_0980.jpg
    212.6 KB · Views: 16
Last edited:
is there any difference in the 412-4233c? one site says they will fit but another says they wont. Are there different types of that same item number. I think I want to go with the 11" and I can get some for 202 shipped but this site say they wont fit the zl1000. dont know if that is just bad info or what.
 
:hello: The two I posted up off of E Bay the first which are 11" is not a pic of the 412 series. The second which are 11.5" is correct. Before I bought my 11.5" which are the same as the 2nd posting I called Progressive. They do not recommend 11" for the ZL 900/1000 because the tire will rub the inside of the fender. My 11.5s rubbed when ridding 2 up so I have them on the stiffest setting but I'm running a 17 inch rim with a 180-55 tire.
 
oh, I was wondering why there seemed to be two different pics of 4233c. I don't plan on ever riding two up. I dont mind taking my own life in my hands but .....
I just want to go as low as practically possible. without having to do a lot of other mods. i have to get new tires and im going with 170 on the 15".
 
no to the struts.:no-no-no: Ill stand on tippy toes before ill do that i think. on another note im considering doing the twin headlight thing after i get the suspension and tires i need.
 
so my 11.5 shocks should be here wednesday. question is now how much do I raise the forks to compensate the rear drop? when do you need to use a fork lowering kit? I know I need to put fork seals in it. Should I do any other upgrades while Im at it?
 
:hello: It will take about an inch to lower the front end in the triple trees to level the bike. Before you do eye ball the exhaust system as it runs under the frame. Then drop the forks until the bike looks level with the ground. It might take more or less. With my 17 inch rear rim & 180/55 tire it will differ than a stock set up. Just do not go to low because you do not want the fender hitting the radiator shrouds. I upgraded to Progressive springs in the front & one of the ZL-oa fork braces. If you do a fork brace & lower your forks make sure the brake lines on the bottom of the spliter does not come in contact with the top of the fork brace when the forks are completely compressed.
 
Back
Top