Learning how to Polish parts

mudrunner88

Webmaster
Administrator
Joined
Jan 27, 2010
Messages
1,736
Reaction score
28
Location
South Carolina
Picked up a few tips from Bacchus and decided to give it a shot. I have a few spare parts to experiment with from the extra frame and thought I would give it a go.

First I wet sanded 600, 800, 1500, 2000

Then black polish, on one wheel, and white polish on another.

I experimented a little bit after with some mag polish and it took the shine away actually. So then I buffed it out with white jewelers rogue again.

Then I experimented with some fighter jet canopy polish that I 'found' one day when I was in the Navy :laughing7:

That gave it an excellent mirror finish.

There has to be an easier way to sand the large flat parts like this though. I enjoy the end results but don't they sell different grade sanding wheels I can put on the bench grinding machine?

Here are some crappy pics from my iPhone...my real camera broke sorry.

The first pic is the other side...But the whole thing looked like this before!
 

Attachments

  • IMG_0020s.jpg
    IMG_0020s.jpg
    66 KB · Views: 29
  • IMG_0022s.jpg
    IMG_0022s.jpg
    65.2 KB · Views: 30
  • IMG_0024s.jpg
    IMG_0024s.jpg
    67.7 KB · Views: 33
  • IMG_0025s.jpg
    IMG_0025s.jpg
    68.2 KB · Views: 28
To get the sanding done a little quicker, I use a bosch detail sander like the one in the link below. You still just can't beat hand sanding, but it saves your hand for the final sanding stages. Instead of buying "velcro" backed sand paper (especially since all the different grits are not available), I just use standard sanding sheets (kind that are in big square sheets with nothing on the back you can get at any auto store). I just take a pair of scissors and cut out big triangles, and attach to the sander with double sided tape. It's not the greatest but it works and saves your hand for the final stages. Hope that helps a little. Later.

[ame="http://www.amazon.com/gp/product/B0000302U5?ie=UTF8&tag=detailsander0a-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=B0000302U5"]Amazon.com: Bosch 1294VSK 2.3 Amp Corner Detail Sander Kit: Home Improvement[/ame]
 
whats the story with the jet polish??


I think this is the same 3m wheel I have .... will save you a ton of time sanding !!

http://cgi.ebay.com/3M-Scotch-Brite...438?pt=LH_DefaultDomain_0&hash=item4aa65db306
Well the jet polish is suppose to be a plastic polish. It is used to polish up the canopy on the jets, and we also use it on some glass guages in the cockpit. I forgot why I needed some one day, I think the headlight lenses on my Dodge Intrepid were all hazed and wouldn't pass inspection so I wet sanded and polished those.

Anyways, I have had good luck using that polish on all kinds of stuff so far. It's a liquid base. I can post the Mil-Spec number and maybe we can see if it is sold retail...


So you use the 3m wheel before going to 800?

Have you ever tried the 3m paint strippers on parts that were previously painted or is that too rough and will leave chunks missing from the aluminum.
 
Back
Top